Back to Explore
TASK
Floor Layers, Except Carpet, Wood, and Hard Tiles
ID
work_construction/floor_layers_except_carpet_wood_and_hard_tiles
Type
TASK
Children
14
Child Nodes (14)
ATOMIC
Sweep, scrape, sand, or chip dirt and irregularities to clean base surfaces, correcting imperfections that may show through the covering.
ATOMIC
Cut flooring material to fit around obstructions.
ATOMIC
Inspect surface to be covered to ensure that it is firm and dry.
ATOMIC
Trim excess covering materials, tack edges, and join sections of covering material to form tight joint.
ATOMIC
Form a smooth foundation by stapling plywood or Masonite over the floor or by brushing waterproof compound onto surface and filling cracks with plaster, putty, or grout to seal pores.
ATOMIC
Measure and mark guidelines on surfaces or foundations, using chalk lines and dividers.
ATOMIC
Cut covering and foundation materials, according to blueprints and sketches.
ATOMIC
Roll and press sheet wall and floor covering into cement base to smooth and finish surface, using hand roller.
ATOMIC
Apply adhesive cement to floor or wall material to join and adhere foundation material.
ATOMIC
Determine traffic areas and decide location of seams.
ATOMIC
Lay out, position, and apply shock-absorbing, sound-deadening, or decorative coverings to floors, walls, and cabinets, following guidelines to keep courses straight and create designs.
ATOMIC
Remove excess cement to clean finished surface.
ATOMIC
Disconnect and remove appliances, light fixtures, and worn floor and wall covering from floors, walls, and cabinets.
ATOMIC