Back to Explore
TASK
Plasterers and Stucco Masons
ID
work_construction/plasterers_and_stucco_masons
Type
TASK
Children
15
Child Nodes (15)
ATOMIC
Cover surfaces such as windows, doors, or sidewalks to protect from splashing.
ATOMIC
Clean job sites.
ATOMIC
Mix mortar and plaster to desired consistency or direct workers who perform mixing.
ATOMIC
Apply coats of plaster or stucco to walls, ceilings, or partitions of buildings, using trowels, brushes, or spray guns.
ATOMIC
Set up scaffolds.
ATOMIC
Determine materials needed to complete the job and place orders accordingly.
ATOMIC
Apply weatherproof, decorative coverings to exterior surfaces of buildings, such as by troweling or spraying on coats of stucco.
ATOMIC
Clean and prepare surfaces for applications of plaster, cement, stucco, or similar materials, such as by drywall taping.
ATOMIC
Create decorative textures in finish coat, using brushes or trowels, sand, pebbles, or stones.
ATOMIC
Apply insulation to building exteriors by installing prefabricated insulation systems over existing walls or by covering the outer wall with insulation board, reinforcing mesh, and a base coat.
ATOMIC
Rough the undercoat surface with a scratcher so the finish coat will adhere.
ATOMIC
Cure freshly plastered surfaces.
ATOMIC
Install guide wires on exterior surfaces of buildings to indicate thickness of plaster or stucco and nail wire mesh, lath, or similar materials to the outside surface to hold stucco in place.
ATOMIC
Spray acoustic materials or texture finish over walls or ceilings.
ATOMIC