Back to Explore
TASK
Stonemasons
ID
work_construction/stonemasons
Type
TASK
Children
16
Child Nodes (16)
ATOMIC
Set vertical and horizontal alignment of structures, using plumb bob, gauge line, and level.
ATOMIC
Lay out wall patterns or foundations, using straight edge, rule, or staked lines.
ATOMIC
Set stone or marble in place, according to layout or pattern.
ATOMIC
Remove wedges, fill joints between stones, finish joints between stones, using a trowel, and smooth the mortar to an attractive finish, using a tuck pointer.
ATOMIC
Clean excess mortar or grout from surface of marble, stone, or monument, using sponge, brush, water, or acid.
ATOMIC
Shape, trim, face and cut marble or stone preparatory to setting, using power saws, cutting equipment, and hand tools.
ATOMIC
Mix mortar or grout and pour or spread mortar or grout on marble slabs, stone, or foundation.
ATOMIC
Construct and install prefabricated masonry units.
ATOMIC
Smooth, polish, and bevel surfaces, using hand tools and power tools.
ATOMIC
Lay brick to build shells of chimneys and smokestacks or to line or reline industrial furnaces, kilns, boilers and similar installations.
ATOMIC
Replace broken or missing masonry units in walls or floors.
ATOMIC
Remove sections of monument from truck bed, and guide stone onto foundation, using skids, hoist, or truck crane.
ATOMIC
Drill holes in marble or ornamental stone and anchor brackets in holes.
ATOMIC
Dig trench for foundation of monument, using pick and shovel.
ATOMIC
Repair cracked or chipped areas of stone or marble, using blowtorch and mastic, and remove rough or defective spots from concrete, using power grinder or chisel and hammer.
ATOMIC