Back to Explore
TASK
Mechanical Door Repairers
ID
work_installation_repair/mechanical_door_repairers
Type
TASK
Children
25
Child Nodes (25)
ATOMIC
Wind large springs with upward motion of arm.
ATOMIC
Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers.
ATOMIC
Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems.
ATOMIC
Repair or replace worn or broken door parts, using hand tools.
ATOMIC
Complete required paperwork, such as work orders, according to services performed or required.
ATOMIC
Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
ATOMIC
Collect payment upon job completion.
ATOMIC
Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment.
ATOMIC
Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location.
ATOMIC
Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment.
ATOMIC
Set doors into place or stack hardware sections into openings after rail or track installation.
ATOMIC
Operate lifts, winches, or chain falls to move heavy curtain doors.
ATOMIC
Remove or disassemble defective automatic mechanical door closers, using hand tools.
ATOMIC
Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines.
ATOMIC
Prepare doors for hardware installation, such as drilling holes to install locks.
ATOMIC
Run low voltage wiring on ceiling surfaces, using insulated staples.
ATOMIC
Cut door stops or angle irons to fit openings.
ATOMIC
Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers.
ATOMIC
Install dock seals, bumpers, or shelters.
ATOMIC
Order replacement springs, sections, or slats.
ATOMIC
Lubricate door closer oil chambers, and pack spindles with leather washers.
ATOMIC
Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
ATOMIC
Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles.
ATOMIC
Bore or cut holes in flooring as required for installation, using hand or power tools.
ATOMIC